sedak isopure® – insulating glass with a transparent glass spacer
Maximum transparency. Minimal interruption.
Architecture with glass is strongest when nothing distracts from the surface. sedak isopure® replaces the conventional dark spacer at exposed edges with a transparent low-iron glass spacer. The result is an insulating glass unit with an almost seamless appearance – for all-glass façades, glass roofs and frameless glazing up to 3.6 × 20 m.
More glass. Fewer visible joints. Greater architectural clarity.

More glass. Less visual interruption.
Conventional insulating glass creates dark lines at its exposed edges. In highly transparent architecture, these lines inevitably become part of the design.
sedak isopure® reduces this visual interruption. Its transparent glass spacer allows adjacent panes to read as a more continuous surface – creating clearer sightlines, calmer façades and lighter-looking roof structures.
In overhead glazing, the spacer becomes barely perceptible against the sky.
Designed to disappear
The architectural effect of sedak isopure® is strongest wherever glass edges remain exposed. Projects such as The Story of Emily Museum and the Roman Villa Museum demonstrate how transparent edge conditions preserve uninterrupted views and reinforce the architectural concept. Not a detail added to the glass. A detail designed to disappear.

Transparency without compromising performance
sedak isopure® combines the appearance of an almost uninterrupted glass surface with the performance of a modern insulating glass unit.
Double- and triple-glazed configurations can be adapted to the project and combined with solar-control and low-E coatings.
Depending on the build-up, triple glazing can achieve Ug values down to 0.6 W/m²K.
The transparent spacer can be configured on one, two or three exposed edges, depending on the architectural intent.
Appearance, thermal performance and glass build-up are designed as one system.
Application fields
- All-glass façades
- Large-format glazing
- Glass roofs and skylights
- Frameless glazing
- Transparent lobbies and entrances
Key benefits
- Transparent glass spacer at exposed edges
- Reduced visual interruption
- Dimensions up to 3.6 × 20 m
- Double- and triple-glazed configurations
- Ug values down to 0.6 W/m²K
- Transparent spacers on one, two or three edges
- Compatible with solar-control and low-E coatings
Plan transparency from the start
Contact
Glass dimensions, spacer configuration, coatings and glass build-up should be coordinated early in the design process. sedak supports architects and façade engineers from concept through to production.
FAQ: Insulating glass with transparent glass spacer
sedak isopure®
What distinguishes sedak isopure® from conventional insulating glass?
Conventional insulating glass typically uses dark spacers at the edge seal. At exposed edges, sedak isopure® replaces these with a transparent spacer made of low-iron glass, creating a significantly more continuous glass appearance while maintaining the performance of an insulating glass unit.
sedak isopure®
How large can sedak isopure® be produced?
sedak isopure® can be manufactured in dimensions up to 3.6 × 20 m, making it particularly suitable for large-format façades and expansive glass roofs.
sedak isopure®
Can sedak isopure® be combined with coatings?
Yes. Solar-control and low-E coatings can be integrated according to the architectural and energy performance requirements of the project.
sedak isopure®
Where has sedak isopure® been used?
Reference projects include The Story of Emily Museum and the Roman Villa Museum, where transparent edge conditions contribute to uninterrupted views and highly transparent architecture.